{"id":10339680146,"title":"XOLB 159 #1 Selling White Ink!","handle":"xolb-159-white","description":"\u003cp\u003e\u003cb\u003eXOLB 159 Glacier White Plus\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA soft, creamy consistency that is very easy to print, but also has very high opacity. It is excellent for printing on most substrates, such as 50\/50 cotton polyester blend, 100% cotton and fleece fabrics. It has excellent opacity, good flash times and that incredible “whiteness.” It also holds dot and fine detail that puts its rivals to shame. It exhibits excellent low-bleed qualities.\u003c\/p\u003e\n\u003cp\u003eXOLB - Xtra Opaque Low Bleed - Plastisol Inks are high opacity multi-purpose inks that are designed to produce extremely opaque prints, yet are very easy to print on a manual press. The smooth, creamy consistency leaves an even uniform print on white flash bases and can be opaque on black without a white base with screens as fine as 160tpi mesh. XOLB inks print well through screen meshes in the range of 83-305tpi. Cure at 325°F (162°C) over a 60-90 second period, depending on oven type and thickness of ink deposit. A thicker deposit will take longer to cure as the heat must penetrate through the entire ink layer. Cleanup with Franmar’s Green-E-Way, Bean-E-Doo or ColorChange.  We recommend our recirculating d-ink sinks for the best clean up solution. \u003cb\u003eWhite Inks\u003c\/b\u003e QCM makes the world’s best phthalate free plastisol white inks. All of our inks use high levels of white pigment rather than relying on cheap puff agents to increase opacity. As a consequence our inks provide a superb flat under base for multicolor printing. QCM also mills all of its white ink. This provides extreme pigment dispersion and fine pigment particle sizes providing exceptional opacity and fine detail resolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrinting: Screen meshes in the range of 83-160 TPI (32-62 TPcm) are recommended for best opacity. Will print through up to a 305 TPI (120 TPcm) with excellent opacity. Screens of 25 n\/cm or higher are strongly recommended. If using lower tension screens adjust off contact accordingly. Use just enough squeegee pressure to deposit the ink on the surface of the shirt. This enhances opacity and helps ensure a good cure. Try not to drive the ink into the fabric. Squeegees in the 70 durometer range, with a sharp edge work well.+ Stencil: Use any direct emulsion or capillary film. Modifiers: XOLB-159 Plus White is ready to use. Modification is not necessary unless you're trying to achieve a special effect or use. Any extenders will affect opacity. XOLB-159 Plus White has excellent shelf life and with cool storage will maintain its creamy consistency. Flashing: Depending on your flash unit, \"Plus White\" will flash in 3 seconds when at 10 watts per sq. in\/heating area (per sq. 2.54cm\/heating area) or in 4-5 seconds when at 6-7 watts per sq. in. \/heating area (per sq. 2.54cm\/heating area). Cleanup: Use any of the commercially available products for the cleanup of plastisol inks. Environmentally Friendly: QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no nvironmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/files\/qcmcolorcard.pdf?178\" title=\"QCM color chart\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/files\/Download-Color-Chart_1.jpg?100431\"\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2010-12-17T09:58:00-08:00","created_at":"2017-08-11T09:33:29-07:00","vendor":"QCM","type":"Inks","tags":["Ink","numbering","Onpress","standard plastisol","supplies","XOLB"],"price":3800,"price_min":3800,"price_max":37200,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41017132370,"title":"Quart","option1":"Quart","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XOLB 159 #1 Selling White Ink! - Quart","public_title":"Quart","options":["Quart"],"price":3800,"weight":2268,"compare_at_price":null,"inventory_quantity":-34,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":41017134546,"title":"Gallon","option1":"Gallon","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XOLB 159 #1 Selling White Ink! - Gallon","public_title":"Gallon","options":["Gallon"],"price":8800,"weight":6804,"compare_at_price":null,"inventory_quantity":-208,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":41017136594,"title":"5 Gallon","option1":"5 Gallon","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XOLB 159 #1 Selling White Ink! - 5 Gallon","public_title":"5 Gallon","options":["5 Gallon"],"price":37200,"weight":31751,"compare_at_price":null,"inventory_quantity":-27,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/products\/QCM-2583.jpg?v=1545948258","\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/products\/qcmcolorcard2013_web_b30cc3b1-f1c4-48a1-aff5-809ac70c8aed.jpg?v=1545948258"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/products\/QCM-2583.jpg?v=1545948258","options":["Size"],"content":"\u003cp\u003e\u003cb\u003eXOLB 159 Glacier White Plus\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA soft, creamy consistency that is very easy to print, but also has very high opacity. It is excellent for printing on most substrates, such as 50\/50 cotton polyester blend, 100% cotton and fleece fabrics. It has excellent opacity, good flash times and that incredible “whiteness.” It also holds dot and fine detail that puts its rivals to shame. It exhibits excellent low-bleed qualities.\u003c\/p\u003e\n\u003cp\u003eXOLB - Xtra Opaque Low Bleed - Plastisol Inks are high opacity multi-purpose inks that are designed to produce extremely opaque prints, yet are very easy to print on a manual press. The smooth, creamy consistency leaves an even uniform print on white flash bases and can be opaque on black without a white base with screens as fine as 160tpi mesh. XOLB inks print well through screen meshes in the range of 83-305tpi. Cure at 325°F (162°C) over a 60-90 second period, depending on oven type and thickness of ink deposit. A thicker deposit will take longer to cure as the heat must penetrate through the entire ink layer. Cleanup with Franmar’s Green-E-Way, Bean-E-Doo or ColorChange.  We recommend our recirculating d-ink sinks for the best clean up solution. \u003cb\u003eWhite Inks\u003c\/b\u003e QCM makes the world’s best phthalate free plastisol white inks. All of our inks use high levels of white pigment rather than relying on cheap puff agents to increase opacity. As a consequence our inks provide a superb flat under base for multicolor printing. QCM also mills all of its white ink. This provides extreme pigment dispersion and fine pigment particle sizes providing exceptional opacity and fine detail resolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrinting: Screen meshes in the range of 83-160 TPI (32-62 TPcm) are recommended for best opacity. Will print through up to a 305 TPI (120 TPcm) with excellent opacity. Screens of 25 n\/cm or higher are strongly recommended. If using lower tension screens adjust off contact accordingly. Use just enough squeegee pressure to deposit the ink on the surface of the shirt. This enhances opacity and helps ensure a good cure. Try not to drive the ink into the fabric. Squeegees in the 70 durometer range, with a sharp edge work well.+ Stencil: Use any direct emulsion or capillary film. Modifiers: XOLB-159 Plus White is ready to use. Modification is not necessary unless you're trying to achieve a special effect or use. Any extenders will affect opacity. XOLB-159 Plus White has excellent shelf life and with cool storage will maintain its creamy consistency. Flashing: Depending on your flash unit, \"Plus White\" will flash in 3 seconds when at 10 watts per sq. in\/heating area (per sq. 2.54cm\/heating area) or in 4-5 seconds when at 6-7 watts per sq. in. \/heating area (per sq. 2.54cm\/heating area). Cleanup: Use any of the commercially available products for the cleanup of plastisol inks. Environmentally Friendly: QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no nvironmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/files\/qcmcolorcard.pdf?178\" title=\"QCM color chart\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0053\/1602\/files\/Download-Color-Chart_1.jpg?100431\"\u003e\u003c\/a\u003e\u003c\/p\u003e"}

XOLB 159 #1 Selling White Ink!

Product Description

XOLB 159 Glacier White Plus

A soft, creamy consistency that is very easy to print, but also has very high opacity. It is excellent for printing on most substrates, such as 50/50 cotton polyester blend, 100% cotton and fleece fabrics. It has excellent opacity, good flash times and that incredible “whiteness.” It also holds dot and fine detail that puts its rivals to shame. It exhibits excellent low-bleed qualities.

XOLB - Xtra Opaque Low Bleed - Plastisol Inks are high opacity multi-purpose inks that are designed to produce extremely opaque prints, yet are very easy to print on a manual press. The smooth, creamy consistency leaves an even uniform print on white flash bases and can be opaque on black without a white base with screens as fine as 160tpi mesh. XOLB inks print well through screen meshes in the range of 83-305tpi. Cure at 325°F (162°C) over a 60-90 second period, depending on oven type and thickness of ink deposit. A thicker deposit will take longer to cure as the heat must penetrate through the entire ink layer. Cleanup with Franmar’s Green-E-Way, Bean-E-Doo or ColorChange.  We recommend our recirculating d-ink sinks for the best clean up solution. White Inks QCM makes the world’s best phthalate free plastisol white inks. All of our inks use high levels of white pigment rather than relying on cheap puff agents to increase opacity. As a consequence our inks provide a superb flat under base for multicolor printing. QCM also mills all of its white ink. This provides extreme pigment dispersion and fine pigment particle sizes providing exceptional opacity and fine detail resolution.

Instructions:

Printing: Screen meshes in the range of 83-160 TPI (32-62 TPcm) are recommended for best opacity. Will print through up to a 305 TPI (120 TPcm) with excellent opacity. Screens of 25 n/cm or higher are strongly recommended. If using lower tension screens adjust off contact accordingly. Use just enough squeegee pressure to deposit the ink on the surface of the shirt. This enhances opacity and helps ensure a good cure. Try not to drive the ink into the fabric. Squeegees in the 70 durometer range, with a sharp edge work well.+ Stencil: Use any direct emulsion or capillary film. Modifiers: XOLB-159 Plus White is ready to use. Modification is not necessary unless you're trying to achieve a special effect or use. Any extenders will affect opacity. XOLB-159 Plus White has excellent shelf life and with cool storage will maintain its creamy consistency. Flashing: Depending on your flash unit, "Plus White" will flash in 3 seconds when at 10 watts per sq. in/heating area (per sq. 2.54cm/heating area) or in 4-5 seconds when at 6-7 watts per sq. in. /heating area (per sq. 2.54cm/heating area). Cleanup: Use any of the commercially available products for the cleanup of plastisol inks. Environmentally Friendly: QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no nvironmental impact. Use a screen wash for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.

 

$38.00
Maximum quantity available reached.