QCM P-5011 Curable Reducer Plastisol Modifer

Curable Reducer
P-5011 Curable Reducer is a 100% solids plastisol reducer that can be added to any plastisol product to reduce the viscosity of the ink. P-5011 curable reducer is fully curable by itself.  QCM recommends a starting point of mixing in 2% - 5% P-5011 (by weight) to the ink you need to thin out. Depending on the ink, you may add up to 10% before affecting the inks opacity; however, it is always recommended that you do a test print to check opacity after any clear ink is added. Taut screens (25 newtons or higher) are strongly recommended. If using lower tension screens adjust off contact accordingly. Recommend a 70 durometer sharp squeegee for best deposit.

Browse more Inks or additional QCM products.


Top Selling Products