QCM WOW1015 Softee Base Plastisol Modifer

Softee Base
WOW-1015 Softee Base is a super soft, buildup free mixing base designed specifically for wet-on-wet printing where a soft print finish is desired.  Softee Base, when mixed with other plastisol inks, will produce an extremely soft print.  Ideal for high volume print jobs, it will not buildup on succeeding screens, allowing for longer press runs with fewer interruptions.  WOW-1015 Softee Base dramatically improves the wet-on-wet printability of ink systems that will not print wet-on-wet. Recommended to revive old or cakey inks.
It is recommended to add up to 75% WOW-1015 Softee Base to your desired ink colors. Test print and cure the mixed ink, checking for desired softness of print. If a softer hand is needed, add up to a total of 90% WOW-1015 to your ink. If pigmenting your inks, add up to 30% pigment by weight. After mixing, the finished inks print well through screen meshes in the range of 83-385. The higher the mesh, the softer the finished print. Screens stretched to a minimum of 25 newtons are recommended. If using lower tension screens, adjust off contact accordingly. Recommend a 70 to 70/90/70 durometer sharp squeegee.

Browse more Inks or additional QCM products.


Top Selling Products